|
HEAVY DUTY MAGNETIC STIRRER
FEATURES
Heavy gauge mild steel chassis with stainless steel or heavy gauge
aluminium cover powder coated in white polyester. Solid state device gives
smooth variable speed control to approximately 1500 rpm. Speed control
dial has ten divisions for easy setting and reproduceability.
Two super strong Neodymium iron boron magnets driven by 1" stack
ball bearing shaded pole motor ensures effective stirring action in heavy
viscosity fluids, or large volumes. Available in three sizes.
SPECIFICATIONS
Catalogue No. MS5
| Overall
dimensions |
105mm Hx 200mm W x 200mm
D |
| Mass
|
2.5kg |
| Recommended
follower size |
30-50mm |
| Recommended
stir volume |
500ml to 5000ml |
Catalogue No. MS6
| Overall
dimensions |
125mm Hx 250mm W x 250mm
D |
| Mass
|
3kg |
| Recommended
follower size |
50-70mm |
| Recommended
stir volume |
1L to 10L |
Catalogue No. MS7
| Overall
dimensions |
125mm Hx 300mm W x 300mm
D |
| Mass
|
3.5kg |
| Recommended
follower size |
60-80mm |
| Recommended
stir volume |
2L to 20L |
LABORATORY FLOCCULATOR - 6 PLACE
DESCRIPTION
| BASE |
Wood,
Laminex covered (black). |
| ILLUMINATION |
Rear or floor mounted flourescent
tube (30W). |
| PADDLES |
Stainless Steel, height
adjustable - 1mm x 15mm x 60mm |
| SHAFTS |
Stainless Steel, height
adjustable with knurled clamps, 6mm diameter x 450mm long. |
| DRIVE |
DC motor driving six paddles
simultaneously. |
| SPEED
CONTROL |
Electronic to provide control
over 12-240 RPM or 5-160 RPM. |
| RATING |
240V 400W |
| CATALOGUE
NO. |
FVS-6 |
SPEED ADJUSTMENT
Multi Turn Pot (speed adj) located top right hand corner.
Controls speed from 12-210 RPM (position
0-6). Top Speed switch gives top speed of 240 RPM. This switch overrides
the speed control pot. The 10 AMP circuit breaker is for low voltage only
(maximum 24 volts DC). The transformer input (240V) is protected by a
3A circuit breaker on central switch panel. Light switch operates independent
of power switch.
|
